If you have ever replaced the battery of your iPhone XS or above models, you may have encountered this annoying message on your iPhone screen:
This message means that your iPhone cannot recognize the new battery, and it will affect your battery health and performance. It does not matter whether you use an original battery or a third-party repair battery, you will still see this message unless you use a special tool to transfer the battery data from the old one to the new one.
Fortunately, there is a solution for this problem. You can use the JCID battery tag on cable 11 pro max to replace the damaged battery cable, and use the JC V1SE programmer to read and write the battery data. This way, you can restore your iPhone battery status to normal and enjoy the full functionality of your new battery.
In this blog post, I will show you how to use the JCID battery tag on cable 11 pro max and the JC V1SE programmer to fix your iPhone 11 Pro Max battery issue. Here are the steps you need to follow:
- Connect the JCID battery tag on cable 11 pro max to the JC V1S programmer, and stick it on the new battery.
- Open the JC V1S software, select the “Battery” mode, and then click the “Read” button to read the data of the new battery.
- Install the new battery to your iPhone 11 Pro Max, and connect the JCID battery tag on cable 11 pro max to the motherboard.
- Open the JC V1S software again, select the “Battery” mode, and then click the “Write” button to write the data of the new battery to your iPhone 11 Pro Max.
- Disconnect the JCID battery tag on cable 11 pro max, and assemble your iPhone 11 Pro Max.
- Check your iPhone 11 Pro Max battery status, and if you do not see any abnormal message, it means that you have successfully fixed it.
You can also watch this video for more details.
I hope this blog post has helped you understand how to use the JCID battery tag on cable 11 pro max and the JC V1S programmer to replace your iPhone 11 Pro Max battery cable. If you have any questions or feedback, please leave a comment below.
